Para cumplir el compromiso que tenemos de ofrecer a nuestros clientes las mejores soluciones para la recuperación de datos, les comunicamos las actualizaciones más recientes con las que contamos en nuestro laboratorio en la Ciudad de México:
LISTA DETALLADA DE ACTUALIZACIONES ENERO 2024
PC-3000 HDD (Express, UDMA, Portable)
PC-3000 Utilities
ADDED – building addressed/non addressed areas of 190 SA module’ option on SMR drives in DE
ENHANCED – reading algorithm of used areas in 190 SA module on WD SMR drives (this option didn’t work before for drives launched with uploaded LDR)
ADDED – an option for all modules reading algorithms to choose a way of 190 SA module reading (only used areas / the whole module)
ADDED – 4F ROM module recovery mode
ENHANCED – HDD configuration editing mode for User Area access
ADDED – Re-Configuration mode for faster access to SA (now drive handle an error for BAD sectors in SA much faster)
ENHANCED – «Slow responding fixing» option
ENHANCED – 02 SA module editor, section editor option has been added
ENHANCED – plugin for ROM editor
ENHANCED – resources editor
ENHANCED – Power Up Log option
ENHANCED – Flash Dir editor option
ENHANCED – translator data parsing in 190 SA module for 3.5″ SMR drives
ENHANCED – logical defects to physical format converting process
ENHANCED – Boot ROM mode
ENHANCED – WD Active utility reading method
ENHANCED – ‘Read only used areas’ option has been added into the «Read and analyze T2» option
ENHANCED – utility speed and overall stability
ADDED – new families CF = «M15» and D1 = «V15X»
ADDED – ROM Tech Mode unlocking preparation patch (UnLock) type 1 for alternative family code 79 = «Crawford»
ADDED – ROM Tech Mode unlocking preparation patch (UnLock), type 1 for family code CF = «M15»
ADDED – ROM Tech Mode unlocking preparation patch (UnLock), type 1 for family code D1 = «V15X»
ADDED – an option to disable «LED BD FAdr 8004” in RAM for “Work with Flash ROM image file” (based on DiskFW)
ADDED – an option to disable «LED BD FAdr 8A19” in RAM for “Work with Flash ROM image file” (based on DiskFW)
ENHANCED – switching of COM port speed rate for Loader uploading via terminal
ADDED – support of additional MCMT formats for plugins, tests and utility actions (including DE options).
Currently 10 formats are supported: MCMT Ver 348 – 8C/A5, 348 – A1, 348 – 79, 348 – 8B, 348 – 9B(4T), 348 – 9B(6-8T), 348-AF, 348 – AD, 348 – D1, 348 – CF
ADDED – Data Extractor utility mechanisms to perform the following functions:
– getting a list of Media Cache extents
– work with extents uploading and reading one by one (or by groups) for damaged MCMT (Media Cache Management Table)
– reading stored data in Media Cache marked as «committed in UA (User Area)»
– getting a list of TRIM extents described in MCMT (MCMT cleaning is needed) for reading
ENHANCED – Hex-editor built-in plugins:
MCMT.Parser – added analysis of lost extent descriptors, auto-generation of the extent map and TRIM extents map from the utility for DE task
MCMT.Edit – added ability to correct data getting after damaged areas reading via SA LBA (for last ‘word’ of each physical sector value 0000 is assigned) on part of the table describing extents
Samsung HDD:
ENHANCED – module size detection 02 FIT in FIT editor table
ENHANCED – the beginning of Burn-In monitoring test
ENHANCED – the beginning of Heads test for a cylinder with sector size different from 512
PC-3000 tools:
ADDED – an option to add modes to «Favourites» from the «Tools/Utility Extensions» menu
ADDED – possibility of alternative profiles naming for profile management system. The alternate name is returned by the utility. Now implemented only for WDC Marvell utility. The ROM version has been added to the profile name. Previously created profiles will be renamed if they are selected to continue working with the disk
ADDED – catalogue profile search by keyword for all modes of selecting resources from catalogue
PC-3000 kernel
ADDED – USB Host and NVMe frequencies settings for the PC-3000 Portable
ADDED – additional control of the validity of readable drive passport data to support work with a logical sector other than 512 bytes.
If the drive returns «garbage» in the passport data, applying such a logical sector size value in bytes to the IDE/SATA interface may cause user zone read/write errors. This control only affects work with a logical sector other than 512 bytes and will not lead to identification read errors if the drive returns passport data that does not pass verification
Data extractor
Enhancements for Seagate F3:
ADDED – the ability to read the current media cache on the map, or by loading several extensions from a file, in the case when an attempt to load the entire module leads to problems with the drive
ADDED – the ability to read out TRIMs to recover the deleted
ADDED – the ability to read the «surface under it» on the media cache map
ADDED – the ability to read «unloaded» media cache extensions
ADDED – the ability to read outdated media cache and surface data. This creates a disk with read data, a JBOD of the source disk and this data, and a disk based on the map of this JBOD with loaded «versions» of outdated data for editing
ADDED – an option «Detect invalid sectors» in task parameters with appropriate GREP and legend. During copying, GREP is parsed, writing the new attribute to the map, and treated as an error
Enhancements for Western Digital SMR:
ADDED – the ability to build and use addressable/non-addressable sector maps
ADDED – the ability to create a task based on the utility and in it:
– In case of «loss» of the second-level translator, create a copy of the data.
– in case of a good translator, using a map of unaddressed sectors, restore data deleted using TRIM
Other enhancements:
ADDED – the ability to create a virtual disk for any file (including compressed and encrypted), (relevant for virtual machines)
ADDED – the ability to skip passport ID reading when creating a task for NVMe drives
ADDED – possibility to make DE scripts for NVMe and SAS drives
ADDED – full support for the PDF format in RAW Recovery, with integrity and size control up to a byte
ADDED – the ability to save files in a zip archive including multivolume. As an option, archive could be additionally encrypted
ADDED – power control for USB tasks created via utility in the PC-3000 Portable
ADDED – processing of sector statuses when saving data from VHD and VHDX disks
ADDED – the ability to optionally show parameters when creating a task
ADDED – saving task parameters in !Backup after each task changing
ADDED – «Clear image files» option to settings. Managed to solve the problem with slow copying speed
ENHANCED – the algorithm of extension checking (separate body, separate extension)
ADDED – the ability to export drive image into forensic format AFF v4
ADDED – the ability to take snapshots of file systems, taking into account the marks
ENHANCED – algorithm for saving files. Previously a significant slowdown when copying a large number of small (size) files was possible
ADDED – the ability to continue saving the file. Relevant for large files
ADDED – tightened control of data validity for ExFAT file system, when parsing directory metadata
ADDED – the ability to open previously saved maps from the main menu
ENHANCED – utility speed and overall stability
PC-3000 SAS
ENHANCED – ROM reading algorithm for CobraB C10K147 family
ENHANCED – microcode building from donor disk resources
ADDED – additional fields to the passport data
ENHANCED – the algorithm of loading different vendors’ microcode for all families
ADDED – parsing modules’ table from RAM for HUH7210xALx20x (AriesHC10) family (not all modules were read) and reading-writing of modules
Por eso somos Los especialistas en recuperacion de datos en México.
Solicite ayuda ahora! 55-4522-9785
- Plan general para el respaldo de datos de una empresa PYME - noviembre 13, 2024
- Video: Recuperacion de datos de memoria flash con VNR y Flash Extractor - septiembre 14, 2024
- Como identificar si un disco duro usa tecnología de aire o helio (helioseal) - septiembre 11, 2024
